School - 1st set of Lessons

My 1st day of School














This is my sit lesson, still working on that.

Comments

Post a Comment

Popular posts from this blog

Trophy Wall

Image
What to do with all the trophies that came with the truck?   I cleaned them up last year and then stored them in the garage.   Well this week Boo figured out what to do with them and where to put them.   Build a spot on the wall for them in the garage.  Think it needs some color  behind it. Thanks to Boo for the great idea. So here is what I have so far. Hopefully next year I can start adding my trophies to the wall. Here's to 2021
Read more

June - STEWART WARNER VACUUM FUEL FEED SYSTEM

Image
Finally got to do some work on the pick-up truck - nothing major - just some of the easy stuff that I knew I can handle.  Jeffery helped me with some of the electric things - found out the starter button was not working and we had to take the floor boards off to get to the starter and take that off.  Ordering parts - oil filter, Lucas Classic Motor Oil, gaskets for the fuel vacuum pump, carburetor rebuild kit, fuel filter,  air filter, starter button, battery, spark plugs and wires, ignition coil and distributor cap. In addition to researching how to fix/replace these parts - I have slowly began cleaning up the pieces as I go - repainting some parts and shining others.  My goal is to try and start it at the end of this month when my brother-in-law is in town. Here are some before and after pictures of the  vacuum fuel feed system - I did not take it apart - the gasket looked pretty good still - (have 2 on back up just in case).  I can hear the inside...
Read more

Horn Works - Klaxon - 8C 6volts

Image
Thanks to my brother-in-law Eugene and my Nephew Dave (good name) we got a lot of the electrical working on Sunday - 24 June.  I was in the house when I heard the distinct noise that brought me back to my submarine days - Dive - Dive - Dive - alright maybe not exactly the same - but still a good and distinct noise that got some neighbors out of the house to come over and inspect what was going on.    So - the horn has been working on and off - seems it works for like 3-4 blasts and then it stops.  So I took it apart and checked it out, cleaned what I could and put it all together. I didn't put it back in the truck because it is like 100 degrees outside today. Here are some of the pieces I was working on in the house with A/C. Information off the horn: Klaxon - 8C 6 volts Delco - Remy Corp. Anderson, IND. USA Holding the horn together - 6 bolts - 3/8 in. open end 2 bolts horn bracket to frame - 1/2 in.
Read more